Ballroom line · stage
Stage wireless microphone system
Handheld, lavalier and headset wireless systems, antenna distribution, stage lighting and control for ballrooms, event venues and multi-purpose halls.
Representative image. Final finish and configuration are confirmed with the quotation.
Key values: RF plan · Handheld / lav · Scenes · Spare TX
Overview
The presenter, the panel and the performance.
Wireless microphones are the most failure-prone part of an event system. Batteries, RF coordination, antenna placement and the number of simultaneous channels decide whether the presentation runs. The equipment is only half the design; the frequency plan and the operating procedure are the other half.
We specify wireless systems by the number of simultaneous channels, the venue size, the RF environment and the local frequency regulations. Antenna distribution, remote antennas and charging are part of the package. A rack of receivers without an RF plan is a support call waiting to happen.
Stage lighting is supplied as a complement to the audio, not as a production service. We provide fixtures, control and a simple scene setup for the venue; rigging, stage construction and event production remain with the local contractor or the event company.
Manufacturing & system package
Manufactured in our own factory. Available as a standalone family, or combined with PA, conference, AV and ballroom families into one complete system package and one combined proposal. ODM and OEM programmes available.
RF plan before hardware
Frequency coordination, antenna placement and channel count are agreed before the receivers are ordered.
Battery discipline
Charging stations, spare batteries and a check-out procedure. The system should not rely on disposable cells.
Antenna distribution
Remote antennas and distribution reduce dropouts in a ballroom with a long throw or a crowded RF environment.
Simple lighting scenes
Presentation, banquet and performance scenes on a simple controller. No lighting designer required for a standard event.
Reference specification
What are the reference specifications and selection rules?
The table is a design reference, not a model datasheet. The quoted model carries the final ratings.
| Item | Reference value or guidance |
|---|---|
| Frequency coordination | RF plan |
| Microphone types | Handheld / lav |
| Lighting presets | Scenes |
| Event continuity | Spare TX |
| Microphones | Handheld, lavalier, headset, boundary |
| Channels | Single to multi-channel systems |
| RF | Frequency coordination, antenna distribution |
| Power | Rechargeable, charging station |
| Lighting | LED fixtures, dimming, control console |
| Scope | Supply and commissioning, not event production |
| Hotel ballroom | Two handhelds, two lavaliers, a charging station and remote antennas. Add a spare transmitter. The receiver rack is placed where the antenna cable can reach the room. |
| Conference panel | One handheld per panellist or shared microphones, plus a lavalier for the presenter. Coordinate the frequencies with the other venues in the building. |
| Wedding or social event | Two handhelds for speeches and a lavalier for the officiant. A simple lighting scene for the head table and the dance floor. |
| Live performance | More channels, instrument wireless, stage monitors and a lighting console. The RF plan and the stage plot are part of the design. |
| Multi-room venue | Coordinate frequencies across all rooms. A shared antenna system or a frequency plan per room avoids interference when rooms are combined. |
Model range
Representative models with photos
Only models with an available product photo are listed. The full range, model-level datasheets and certificate scope are supplied with the quotation. Brand names are not used on this site.
Request the full model list| Photo | Model | Type | Note |
|---|---|---|---|
 | JB-537 | UHF wireless conference microphone | One-to-two / one-to-four / one-to-eight wireless conference microphone system. |
 | JM-913D | Wireless chairman / delegate microphone | Wireless conference microphone for chairman or delegate positions. |
 | JB-C200AF | LED stage light | LED 4-eye dual-colour waterproof surface light. |
 | JB-G250 | Beam moving head | Moving-head beam fixture for stage and event lighting. |
 | K240 | Lighting console | Lighting control console for stage scenes and event presets. |
Representative models only. Key electrical, acoustic and certification values are confirmed in the model datasheet and the quotation.
Typical applications
Where this family is used
Hotel ballrooms
Meeting by day, banquet by night, with a system the hotel AV team can run.
View application design
Convention centres & multi-purpose halls
Dividable halls, large audiences and a technical team that needs the room to reconfigure quickly.
View application design
Weddings & event venues
A system that a venue team can set up for a ceremony, a banquet and a dance floor without an audio engineer.
View application designRelated
Build the rest of the chain
A working system is more than one family. These are the adjacent blocks that are usually specified together.
Ballroom line · reinforcementBallroom & stage sound
Line arrays, point-source loudspeakers, subwoofers, stage monitors and amplifiers for hotel ballrooms, convention halls and event venues.
Conference line · speechConference microphones & discussion
Conference hosts, chairman and delegate units, gooseneck microphones, paperless terminals and discussion systems for boardrooms, councils and lecture halls.
Conference line · controlAV control & matrix switching
Control processors, touch panels, wall plates and AV matrices that switch sources, route audio and video, and set the room to a known state.
PA line · everydayBackground music systems
Music sources, players, zone volume control and loudspeaker selection for hotels, retail, restaurants, offices and public areas — with the paging and fire override designed in from the start.
Questions
Frequently asked questions
The questions that usually decide the scope: loudspeaker count, amplifier size, fire interface, certification and who installs the system. If your question is not here, send it with the building data.
Ask an application engineerHow many wireless microphones can I use at once?
It depends on the frequency band, the local regulations, the receiver quality and the RF environment. A practical hotel ballroom system often uses 4–8 channels; a larger event may need more. The frequency plan and the antenna distribution are designed before the count is fixed.
Are wireless frequencies legal in every country?
No. The permitted bands, power limits and licensing requirements differ by country. We confirm the destination country and the frequency band before quoting. Using the wrong band can result in interference or a legal problem.
Do you supply stage lighting?
Yes, as equipment supply and commissioning. We provide fixtures, control and simple scenes. We do not provide rigging design, stage construction or event production. Those remain with the local contractor or event company.
Can the wireless system share antennas?
Yes, with an antenna distribution system. It reduces clutter and improves reception. The distribution design depends on the receiver count, the cable length and the room layout.
What happens if a battery fails during an event?
The operating procedure should include fresh batteries, a spare transmitter and a check at the start of each session. A charging station and a battery log reduce the risk. We include the procedure in the handover.
Next step
Send the room, not the model
Tell us the building type, the zones, the ceiling height and the fire interface. We will check whether this family fits before we quote it, and show how it combines with the rest of the system in one proposal.
- Coverage and tap-load calculation
- Interface list for fire, paging and network
- Certificate scope confirmed per model
- ODM / OEM or private-label requirement
Project inquiry
Ask about Wireless & stage
Send the room or building data once. We return one combined proposal covering PA, conference, ballroom and AV, with the equipment schedule, interface list and the questions that still need an answer. ODM and OEM inquiries are welcome. Drawings are welcome but not required.